0
The Bosterbio OneStep ELISA kit is a solid phase direct ELISA sandwich kit. Instead of adding samples detection antibody and ABC-HRP separately, The OneStep ELISA kit allows the user to add standards, samples and controls to wells in one step, along with the incubation buffer. After a simple washing step, an enzyme conjugate reagent is added into each well. After the excess enzyme conjugate is washed out, the substrate is added into each well. The enzyme catalyzes the substrate yielding a blue color (Amax = 370nm and 652nm) that changes to yellow (Amax = 450nm) upon addition of a sulfuric or phosphoric acid stop solution. The intensity of color developed is directly proportional to the concentration of target protein in the samples. A standard curve is generated relating color intensity to the concentration of target protein.
| Product Name | Human Immunoglobulin E (IgE) OneStep ELISA Kit |
|---|---|
| SKU/Catalog Number | EK7093 |
| Description | Human Immunoglobulin E (IgE) OneStep ELISA Kit, tested with Serum and Plasma. Format: 96wells/kit, with removable strips. |
| Cite This Product | Human Immunoglobulin E (IgE) OneStep ELISA Kit (Boster Biological Technology, Pleasanton CA, USA, Catalog # EK7093) |
| Validated Species | Human |
| Application | ELISA *Our Boster Guarantee covers the use of this product in the above tested applications. |
| Cross Reactivity | There is no detectable cross-reactivity. |
| Pack Size | 96wells/kit, with removable strips. |
| Sensitivity | 40 IU/ml *Sensitivity, or Lower Limit of Detection (LLD), is the minimum level of target protein the ELISA assay can detect. We measure 20 blank wells and if the O.D. value is 2 standard deviations higher than the blanks' average O.D. the sample can be deemed positive. |
|---|---|
| Assay Range | 40-640 IU/ml *This assay range is determined using common samples. For samples with low target protein concentrations, users can adjust the standard curve to extend the lower limit of assay range. |
| Sample Type | Serum and Plasma *The above listed samples are the ones valided with the assay. If you do not see your sample of interest listed, as long as there is enough level of target protein present in the sample, this Picokine? ELISA kit should detect it. **For protocol and tips regarding preparing your sample of interest, please check our ELISA sample preparation guide. |
| Storage | Store the kit at 2°C to 8°C. Keep microwells sealed in a dry bag with desiccants. The reagents are stable until expiration of the kit. Do not expose reagent to heat, sun, or strong light. Avoid multiple freeze-thaw cycles(Shipped with wet ice.) |
| Description | Quantity |
| 1. Microwell coated with Streptavidin | 12x8x1 |
| 2. IgE Standard: 6 vials (ready to use) | 0.5ml |
| 3. IgE Biotin Conjugate: 1 bottle (ready to use) | 12 ml |
| 4. IgE Enzyme Conjugate: 1 bottle (ready to use) | 12 ml |
| 5. TMB Substrate: 1 bottle (ready to use) | 12ml |
| 6. Stop Solution: 1 bottle (ready to use) | 12ml |
| 7. 20X Wash concentrate: 1 bottle | 25ml |
1. Distilled or deionized water
2. Precision pipettes
3. Disposable pipette tips. Multichannel pipettes are recommended in the condition of large amount of samples in the detection.
4. ELISA reader capable of reading absorbance at 450nm
5. Absorbance paper or paper towel
6. Graph paper
1. For Research Use Only. Not for use in diagnostic procedures.
2. For laboratory use.
3. Potential biohazardous materials: The calibrator and controls contain human source components, which have been tested and found non-reactive for hepatitis B surface antigen as well as HIV antibody with FDA licensed reagents. However, as there is no test method that can offer complete assurance that HIV, Hepatitis B virus or other infectious agents are absent, these reagents should be handled at the Biosafety Level 2, as recommended in the Centers for Disease Control/National Institutes of Health manual, "Biosafety in Microbiological and Biomedical Laboratories." 1984
4. Do not pipette by mouth. Do not smoke, eat, or drink in the areas in which specimens or kit reagents are handled.
5. The components in this kit are intended for use as an integral unit. The components of different lots should not be mixed.
6. It is recommended that serum samples be run in duplicate.
7. Optimal results will be obtained by strict adherence to this protocol. Accurate and precise pipetting, as well as following the exact time and temperature requirements prescribed are essential. Any deviation from this may yield invalid data.
1. Collect blood specimens and separate the serum immediately.
2. Typically, specimens may be stored refrigerated at (2-8°C) for 5 days. If storage time exceeds 5 days, store frozen at (-20. C) for up to one month.
3. Avoid multiple freeze-thaw cycles.
4. Prior to assay, frozen sera should be completely thawed and mixed well.
5. Do not use grossly lipemic specimens.
Prepare 1X Wash buffer by adding the contents of the bottle (25 ml, 20X) to 475 ml of distilled or deionized water. Store at room temperature (20-25°C).
Prior to assay, allow reagents to stand at room temperature. Gently mix all reagents before use.
1. Place the desired number of coated strips into the holder
2. Pipette 25ul of IgE standards, controls, and samples in to appropriate wells.
3. Add 100ul of Biotin Reagent into each well. Shake the plate for (10-30) sec.
4. Cover the plate and incubate for 30 minutes at room temperature (20-25°C).
5. Remove liquid from all wells. Remove liquid from all wells. Wash wells three times with 300ul of 1X wash buffer. Blot on absorbance paper or paper towel.
6. Add 100ul of Enzyme Reagent into each well.
7. Cover the plate and incubate for 30 minutes at room temperature (20-25°C).
8. Remove liquid from all wells. Remove liquid from all wells. Wash wells three times with 300ul of 1X wash buffer. Blot on absorbance paper or paper towel.
9. Add 100ul of TMB substrate to all wells.
10. Incubate for 15 minutes at room temperature.
11. Add 50ul of stop solution to all wells. Shake the plate gently to mix the solution.
12. Read absorbance on ELISA Reader at 450 nm within 15 minutes after adding the stopping solution.
(See Reagent Preparation Section). Blot On Absorbent Paper Towels.
1. Check IgE standard value on each standard vial. This value might vary from lot to lot. Make sure you check the value on every kit. See example of the standard attached.
2. To construct the standard curve, plot the OD for each C-Peptide standard point (vertical axis) versus concentration in IU/ml (horizontal axis) on a linear graph paper. Draw the best curve through the points.
3. Use the absorbance for controls and each unknown sample to determine the corresponding CA15-3 in U/ml from the standard curve.
00.511.522.50100200300400500OD 450nmTotal IgE ELISA
1. The test results obtained using this kit serve only as an aid to diagnosis and should be interpreted in relation to the patient's history, physical findings and other diagnostic procedures.
2. Do not use sodium azide as preservative. Sodium azide inhibits HRP enzyme activities.
温馨提示:因厂家更改产品包装、产地或者更换随机附件等没有任何提前通知，且每位咨询者购买情况、提问时间等不同，为此以下回复仅对提问者3天内有效，其他网友仅供参考！若由此给您带来不便请多多谅解，谢谢！
服务热线
0771-3293894
新浪微博
腾讯微博
QQ空间
客服
